VM150 Chuck

The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten using the 'T' key as you would in a standard key operated scroll chuck.

WORLD FIRST revolutionary new chuck design

  • INNOVATIVE AND PATENTED
  • DUAL ACTION opening and closing
  • Jaws and Inserts compatible with the VM120
  • Stronger, larger Backing Jaws
  • Can be used for turning in reverse
  • Backing Jaws will not protrude past Chuck Body for safety

To switch from lever operated to key operated, line up the two dots as shown above, and rotate the locking pinion using the 10mm T-bar (supplied with the chuck). Turn clockwise to engage and anti-clockwise to disengage

The VM150 Chuck is available with either the Standard Jaws or without Jaws to facilitate mounting one of the various jaw options available to meet your turning needs.  Available with select Direct Thread options or a large selection of inserts.


VM150 Specifications    

50 mm expansion range on Jaws
Net Weight: 11.6lbs (5 kg)    Diameter: 6”, (150mm)The VM150 Chuck accepts the same Jaws and Inserts as a VM120 chuck.
 

Chuck includes:

1 x Standard Jaws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only)