CV1800

The CV1800 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection.

The CV1800 is available in a Left Hand Configuration, with Right Hand Configuration available as a Custom Order (custom order surcharge will apply) as well as with Single Phase or 3Phase Power, and WITH or WITHOUT Filters.

Our cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking) and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

The CV1800 intake is sized to receive 6" sewer and drain PVC - ASTM D2729, ASTM D3034 and SDR 35 Pipe. Alternative types of ducting may be used - please contact Customer Service for more details.

Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice.

CV1800 Bundles include:

Leeson 5HP Motor - Single Phase or 3 Phase
15" Blower Housing (16" upgrade available)
15" Impeller (16" upgrade available)
CV1800 LH Cyclone Body with 6" intake sized to receive sewer and drain PVC - ASTM D2729, ASTM D3034 and SDR 35 Pipe.
90° Filter Transition
Hanging Plate
6" Flex Hose & Clamps for easy connection to Collection Drum
Cyclone Hardware Kit
(2) 9B300NANO Wynn Filters (If a Bundle with filters is chosen.)
Filter Clamp

Nano Filter Information (If Selected)

Model: 9B300NANO
Flangeless
MERV Rating: 15
Efficiency: 99.999% at .5 micron
12.75" OD x 34" x 8.4" ID (300 sq. ft.)

Collection Bin, Wall Mounting Brackets and Filter Clean Out Box sold separate.

16” Blower Assembly Upgrade – Available for our CV1800 LH models only, this upgrade increases baseline CFM from 1,442 to 1,701. Great for shops running dust-intensive tools like drum or wide-belt sanders.

Detail	Spec
Performance:	1,442 CFM with 15" blower assembly (standard); 1,701 CFM with 16" blower assembly upgrade
Noise Level:	78 dB at 10’
Impeller:	15” (16" upgrade available)
Motor:	5HP, 230V - Draws 20.8 FLA
Intake Chute:	6.25 ID”
Filter Model:	Wynn 9B300NANO
Filter Efficiency:	99.999% at .5 micron (MERV 15)
Static Pressure is a variable unit based on your individual shop set up and ducting design. You may find more information regarding static pressure as well as a calculator at: https://www.clearvuecyclones.com

Please see a list of available products below. If you are looking for something specific that you don't see here, please don't hesitate to contact us and we'll be sure to find what you are looking for.

Part Number	Description	Price	Quote
CV1800LH 1P W/FILTER	CV1800 LH configuration with Filters. Single Phase 5HP Motor.	$2,421.90 CDN	Add to Quote
CV1800LH 1P W/O FILTER	CV1800LH configuration without Filters. Single Phase 5HP Motor.	$2,028.60 CDN	Add to Quote
CV1800LH 3P W/FILTER	CV1800 LH configuration with Filters. 3 Phase 5HP Motor.	$2,456.40 CDN	Add to Quote
CV1800LH 3P W/O FILTER	CV1800RH configuration without Filters. 3 Phase without Filters.	$1,945.80 CDN	Add to Quote
CV1800LH Upgrade 1P W/FILTER	CV1800 LH configuration with Filters. Single Phase 5HP Motor. Upgrade-16" Impeller	$2,660.10 CDN	Add to Quote
CV1800RH 1P W/FILTER (Custom)	CV1800 RH configuration with Filters. Single Phase 5HP Motor.(Custom Order)	$2,559.90 CDN	Add to Quote
CV1800RH 1P W/O FILTER (Custom)	CV1800RH configuration without Filters. Single Phase 5HP Motor. Custom Order	$2,166.60 CDN	Add to Quote
CV1800RH 3P W/FILTER. (Custom)	CV1800 RH configuration with Filters. 3 Phase 5HP Motor. Custom Order	$2,596.40 CDN	Add to Quote
CV1800RH 3P W/O FILTER (Custom)	CV1800LH configuration without Filters. 3 Phase without Filters. Custom Order	$2,085.80 CDN	Add to Quote

I tend to use the Vicmarc VL150 for most projects

A few weeks after ordering I was eager to unpack my new Vicmarc VL150 and bolt it on the base waiting in position. The cast iron housing and the quality of the overall manufacturing provides the feel and behavior very much like a solid stand large lathe for projects less than 12”. Additionally, the VL150 comes with the advantages of a small lathe-tools and accessories can be used in close range and operation from the tail stock end is easy, no need moving the assembly and head stock or even mounting the lathe bed. Also, tail stock removal is fast and does not require significant strength.

Electronic RPM control and the VL150 power at very low RPM’s allow turning operation at optimum speed for high quality turning projects. I like that “reverse turning” requires override an is reset to normal direction afterward. In the heat of the moment one is prone to forgetting with unwanted things going to happen.

Turns out I tend to use the Vicmarc VL150 for most projects, unless the diameter or size requires me to use my large lathe. Fortunately, compatibility with its 1” tool rest diameter and the #2 Morse taper tools swap with a large is easy without new inventory. Well worth waiting for the shipment from Australia.

Kai, Calgary, AB.

Called me within 30 minutes!

After an extreme length of time and research into exactly what tools I would upgrade to and make an investment in I decided to go with Carter and Sons (C&S) M42 tools and I wanted to deal with a Canadian distributor. The people at C&S directed me to Branches to Bowls. I placed a request for a quote and was shocked that 30 minutes later Ken called me to discuss my order. Not only did he review my order with me, but offered a wealth of information about turning. I appreciated the exchange so much I had to send him some of the blanks of a type of wood he had never turned before. He promptly sent me a quote and we were able to finalize it the next day.

Thank you very much Ken and I look forward to doing business with you again in the future.

Peter in Nova Scotia.

These tools are like being handed the keys too a Porsche

Hey Ken,

Quick email to say how pleased I am with the Carter and Son tools. I’m re-learning how to turn all over again it seems but what a joy to get covered in a pile of curly shavings, lol. These tools are like being handed the keys too a Porsche after driving a Russian Lada. I’ve just started working with the bowl gauge, the spindle gauge is amazing, especially on higher speed, the shavings fly off.

The bowl gauge works so well at my lowest speed, it’s just so much safer. The only problem I have now is that all other tools fail in comparison... Starting too think about a couple more down the road once I get more time flying curly shavings.

Cheers,

Trevor, NS.

VL300 is the best wood lathe I’ve used

The Vicmarc VL300 is the best wood lathe I’ve used. The rest assembly is easy to move using one hand, the rest height easy to adjust. And Vicmarc chucks are second to none.

Richard Raffan, Australia.

Dovetail jaws are the best out there

Ken,

Wow!. I am extremely impressed with the VM 100 chuck. I have not found any other that runs as smoothly. It runs true and precise. Dovetail jaws are the best out there and direct thread is an added bonus.

Thanks Very Much,

Antho, Duncan. BC.

Call us Today: 1-403-830-3049