vicmarc-catalogue

Vacuum Chucks

ROTATING UNIONS

This Vacuum Chuck has been designed as an aid to Woodturning. It enables an item to be re-mounted on the lathe for finishing without risking further holding marks. The rotary adapter is fitted with two ball bearings and lets the lathe spindle turn freely while the hose and connection remain stationary.

vacuum-1
vacuum-2
vacuum-3
vacuum-4
Rotating Union 10mm inlet – to suit vacuum hose. Rotating Union 32mm inlet – to suit vacuum cleaner. Rotating Union M16 x 1.5 – to suit back of lathe.
Part No. V01216 Part No. V01217 Part No. V01215
Rotating Unions, V01216 and V01217 can be mounted directly to a self-centring four jaw chuck by clamping on the provided dovetail or they can be mounted directly to the lathe spindle. To do this you will need to select the respective chuck Insert (VM120/150) to suit your lathe. Two ball bearings prevent the hose from spinning. The Rotating Union M16 x 1.5 screws into the outboard side of the lathe and connects to the vacuum hose. Two ball bearings prevent the hose from spinning.
vacuum-5

Vacuum adaptor sleeve available to suite 35mm diameter vacuum cleaner nozzles

Part No. V01016

vacuum-6

VACUUM CUPS

vacuum-7
vacuum-8
vacuum-9
100mm 150mm 200mm
Part No. V01221 Part No. V01222 Part No. V01223
Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. The rotating unions (10mm inlet or 32mm inlet) can mount directly to the Vacuum Cups. Alternatively an insert can be mounted to the Vacuum Cups and the rotating union M16x1.5 is attached to the outboard side of the lathe
vacuum-10
vacuum-11
vacuum-12
Vacuum Cup Screwed onto Rotating Union 10mm inlet, used with vacuum pumps Vacuum Cup Screwed onto Rotating Union 32mm inlet, used with vacuum cleaners Vacuum Cup Screwed onto Vicmarc VM90/100 insert, used with Rotating Union M16 x 1.5

VACUUM PLATE

vacuum-13
vacuum-14
Vacuum Plate with rotating union 32mm inlet Vacuum Plate only
Part No. V01224 Part No. V01228
This unit consists of a 300mm diameter, foam covered plate and it’s fitted with a Rotating union
M40x2 32mm inlet.
Vacuum plate can also accept a VM90/100 insert and be mounted directly to the lathe spindle. The rotating union M16 x 1.5 is used with this configuration. It can be used with the Rotating union M40x2 10mm inlet (as shown).
The Vacuum plate can also be purchased separately
vicmarc-catalogue